Actualités et presse Webinaires sur le marquage laser: inscription gratuite maintenant!

06/12/2022 15:00 – 06/12/2022 15:00 offline [en anglais] Regulatory Update on UDI: What you need to know about UDI marking of medical devices, instruments and implants

We bring you up to date on the current status of UDI direct marking of medical devices and give an overview of the UDI system according to MDR and FDA.

Plus de details

30/08/2022 17:00 – 30/08/2022 18:00 offline [en anglais] Ready to "GO" - laser marking easy to integrate and set-up with Titus and FOBA Go

Plus de details

28/04/2022 16:00 – 28/04/2022 17:00 offline [en anglais] Lean manufacturing: Can lasers do more than marking?

Plus de details

24/03/2022 16:00 – 24/03/2022 17:00 offline [en anglais] Automation & Laser Marking

Plus de details

24/02/2022 16:00 – 24/02/2022 17:00 offline [en anglais] UDI requirements - Are you ready now?

With the UDI system (Unique Device Identification) manufacturers are obliged to identify and register medical devices. In the EU, the UDI is regulated within the framework of the MDR (Medical Device Regulation). In the USA, the FDA is authoritative. Seamless product tracking, less product piracy and highest patient safety are the goals. We bring you up to date on the current status of UDI direct marking of medical devices and give an overview of the UDI system according to MDR and FDA.

Plus de details

21/10/2021 16:00 – 21/10/2021 17:00 online [en anglais] UDI Expert Talk: Automation and medical device manufacturing – What you need to know!

In diesem Webinar wird Faycal Benayad-Cherif, Global Strategic Account Manager bei FOBA, über die technischen Herausforderungen bei der Automatisierung eines Lasermarkiervorgangs in der Medizintechnik sprechen. Sie erhalten Einblicke in unterschiedliche Automatisierungsprozesse: vom Cobot bis hin zur vollautomatisierten Lösung, von der Beschriftung einer Knochenschraube bis hin zur umlaufenden Ringmarkierung einer Kanüle.

Plus de details

30/09/2021 16:00 – 30/09/2021 17:00 online [en anglais] UDI Expert Talk: Preventing corrosion during laser marking – Practical application experience

Laser marking on metals like titanium or stainless steel can cause corrosion in the lasered areas. But only if corrosion is prevented, the direct mark on a medical device will remain durable throughout its lifetime. In addition, particle emission can only be prevented if the surface is intact, so that biocompatibility can be guaranteed, e.g. of an implant.

Plus de details

09/06/2021 17:00 – 09/06/2021 18:00 online [en anglais] These 3 Vision Technologies Will Change Your Laser Marking Experience

When it comes to reducing waste and increasing productivity while maintaining the highest precision and process reliability, camera systems are indispensable in laser marking machines. To ensure these conditions, we would like to introduce our three software solutions "Mosaic", "IMP" and "Point and Shoot". These solutions not only prevent the laser from marking the wrong part but also inspect the laser mark right after marking. Furthermore, our patented software feature MOSAIC allows you to easily label your product without expensive and time-consuming product fixtures.

Plus de details

25/03/2021 10:00 – 25/03/2021 11:00 online [en anglais] UDI Expert Talk: EU MDR UDI requirements – Strategies for addressing US and EU direct marking compliance

In addition to labeling and packaging requirements, the US Food and Drug Administration’s (FDA’s) Unique Device Identification (UDI) regulation and the European Union’s (EU's) new Medical Device Regulation (MDR) and In Vitro Diagnostic Regulation (IVDR) require certain devices to have UDI direct marking.

Plus de details

14/01/2021 11:00 – 14/01/2021 11:30 online [en anglais] VMD Webinar: Lasermarking of polymers and the improvement through laser pigments

Virtual Manufacturing Day - Lectures Series

Plus de details

15/12/2020 15:00 – 15/12/2020 15:30 online [en anglais] VMD Webinar: Design and Development and Speed to Market

Accelerated product development process, Lean product development approach, Lean product launch with high quality processes

Plus de details

28/10/2020 15:00 – 28/10/2020 16:00 online [en anglais] UDI Expert Talk: How to fix your pains with UDI-compliant medical device marking and save up to US$ 10,000 a year

Equipment validation and process documentation are time consuming and delay a quick start of production. This also applies to the commonly required part fixtures used in the laser marking procedure. What if you could not only save fixture set-up costs but also documentation and qualification efforts?

Plus de details

24/09/2020 17:00 – 24/09/2020 18:00 online [en anglais] Smart Lasers in the World of Plastics

This Webinar is external via SPE/Plastics Decorating Magazine. Join FOBA's business manager Dr. Faycal Benayad-Cherif to learn all about laser marking on plastic!

Plus de details

26/08/2020 17:00 – 28/10/2020 18:00 online [en anglais] Direct Part Marking Using Lasers in the Medical, Automotive, & Aerospace Industries

Direct Part Marking Using Lasers in the Medical, Automotive, & Aerospace Industry - How to Stay Compliant with DataMatrix, UID, and UDI Codes

Plus de details