Laser Marking System V.0020-uv
UV-laser marker

UV laser marker for high-contrast markings on highly sensitive products

Send Product Request

Overview

The FOBA V.0020-uv ultraviolet marking laser applies high-contrast markings even on sensitive products. As the vector scanning laser impacts the product's surface photo-chemically and with reduced peripheral heating, the heat effect of laser marking on substrates and materials can be kept to a minimum. With a typical pulse duration of 20 ns and a beam diameter of 10 µm, the V.0020-uv laser marking system only colors the surface instead of foaming the material, which means less impact on the product. Therefore it is possible to mark even highly sensitive and previously unmarkable material with FOBA's pioneering UV laser marker.

Typical applications that benefit from this solution range from aircraft cables and translucent or colored tubes for various industries through medical plastics for invasive applications or flame-resistant plastics for electronic housings to glass. UV-lasers apply permanent and sterilization-resistant laser marks on medical products such as catheters or insulin pumps, as well as filigree and brilliant laser marks on glass without breaking it. Also silicones or white polyamides can be laser marked with FOBA V.0020-uv.


Benefits

Material protection

Safety and integrity for sensitive and critical materials

 

Biocompatibility

Hygiene and sterility for UV laser marked medical plastics

 

Impressive markings

Filigree, high-contrast markings

 

High contrasts without additives

Solvent-free and additive-free marking of plastics 

 

Low maintenance and economical

Low-maintenance thanks to long-lasting diodes

 



Technical specifications

V.0020-uv

V.0020-uv

Marking features
Marking heads SS10 and SS7 with four focus lenses (f =103 mm/ 160 mm/ 214 mm/ 511 mm)
Marking fields* From 64 x 76 mm2 (SS10, f = 103 mm) to 375 x 375 mm2 (SS10/ SS7, f = 511 mm)
Marking speed* Up to 5,000 mm/s, up to 500 characters/s 
Line width From 10 µm (depends on focusing optic)
Laser
Type Pulsed Nd:YVO4 laser (Vanadat), diode-pumped, wavelength - 355 nm
Laser class 4 (as per DIN EN 60825-1)
User interfaces
PC software FOBA MarkUS or FOBA Draw (on separate, external, optional Windows 7 PC)
Interface Ethernet
Supply
Electrical requirements L/N/PE 100 – 240 VAC, 50/60 Hz
Power consumption Typically 400 W
IP rating IP20 marking unit, IP21 supply unit
Cooling     Air-cooled
Temperature  15 – 40 °C | 59 - 104 °F
Humidity 90 % (max. 20 °C | 68 °F), 30 % (max. 40 °C | 104 °F), non-condensing
Weight Marking unit approx. 25 kg**, supply unit approx. 20 kg
Other options
Vision alignment system

Intelligent Mark Positioning (IMP) for the precise position detection of parts/to-be- processed areas and automatic alignment of marking/engraving/finishing


Laser pointer

Interface Profibus, PROFIBUS, EtherCAT* (with MarkUS 2.12)

 


*application dependent **without F-Theta lens


Download

Live Chat Support

Chat with our Inside Sales in case of questions.

Chat with us

Contact us

Our sales and application engineers as well as our service technicians and project managers are close to you.

Send request